2027 Chery Fulwin T11 unveiled in production form, launch set for November 12
Recently, the real car of the 2027 Chery Fulwin T11 was unveiled, with the new car set to go on sale on November 12.
It is reported that the new model will mainly feature upgrades in terms of configuration.
In terms of appearance, the 2027 Chery Fulwin T11 largely retains the design of the current model. The main changes are the removal of the chrome trim on the lower edge of the doors and a new design for the rear bumper, which also removes the chrome trim.
The new model continues to use a simplified exterior design. In terms of dimensions, the new model is 5205/1998/1800mm in length, width, and height, respectively, with a wheelbase of 3120mm. The new model will be equipped with electric doors and an AR projection tailgate, with foot-sensor activation.
At the front, the car carries one LiDAR unit and brings the Falcon 700 assisted-driving system, with upgraded BMC chips and other hardware supporting end-to-end city NOA on a one-stage R6 reinforcement-learning model - it can pass unprotected intersections and roundabouts. The Falcon smart-driving physical AI model drives like a veteran, offering parking-spot-to-parking-spot assisted driving. The new model will also offer two new exterior colors: Danxia Red and Xiayu Orange.
In terms of the interior, the new model will continue to use a 30-inch 6K global screen. The car's interface will be optimized and upgraded, with the new HMI 2.0 system bringing features like a Dynamic Island. The new model will also offer CarPlay, HiCar, and CarLink connectivity, and will come standard with the Xiaoqi AI voice assistant, which integrates multiple large model interfaces, allowing for voice commands. It will also feature the Boya Sound luxury audio system.
The seats are made of 13-layer + 5D foam material, with all three rows featuring electric seats, a 9.2L true refrigerator capable of regulating temperatures from -18°C to 50°C, and a 17.3-inch 3K entertainment screen in the rear cabin.
In terms of power, the new model will upgrade to a 6-in-1 electric drive system and will be equipped with a 1.5T range-extender system. It will offer a single-motor rear-wheel-drive version with a maximum power of 195kW and a peak torque of 324N·m, with a battery capacity of 33.68kWh. The CLTC range is 220km, with a combined range of 1400km. The WLTC fuel consumption is 6.1L/100km. The four-wheel-drive version will feature two motors, with a system power output of 345kW and a peak torque of 634N·m. The 0-100km/h acceleration time is 5.4 seconds. The CLTC range is 220km, with a combined range of 1400km. The WLTC fuel consumption is 7.02L/100km. It can charge from 30% to 80% in just 15 minutes. The new model will offer 5+1 driving modes: Eco, Comfort, Sport, Rain/Snow, Off-road and Custom.