Recently, the Great Wall Raptor Plus Force Soul Edition real car was unveiled, and the new car uses exclusive design and decoration kits to strengthen the off-road aura. All modified parts are original R&D and vehicle regulation-level process assemblies. They can be directly licensed after compliance at the factory, and do not need to be restored for annual review. In terms of appearance, the Great Wall Raptor plus Power Soul Edition adopts a two-color body with blazing orange and flame shadow black. At the same time, the new car adopts a new exterior inner round lamp, the front grille decoration is redesigned, the new H-shaped grille is fused with the front bumper decoration, which enhances the three-dimensional feeling. The raised front cover also adds an air inlet, and the new car roof continues to provide lidar. In terms of model size, the length, width and height of the new car are 4912/1950/1905mm and the wheelbase is 2850mm. The side features an all-black design, including rims and a luggage rack. The new car is also equipped with 18-inch AT off-road tires, and the side window panel is printed with the soul English logo. The rear of the vehicle, the external spare tire also uses AT off-road tires, and the rear door is opened laterally. Orange stitching will also be introduced to the interior of the new car. In terms of power, the new car is equipped with a plug-and-mix system consisting of a 1.5T turbocharged engine and a dual motor. The system has an integrated power of 330 kW, an integrated torque of 660 Nm, a CLTC pure electric range of 255 km, a 0-100 km/h acceleration of 5.8 seconds, and a minimum charge fuel consumption under WLTC conditions 6.2L/100km. The new car provides a rear axle electronically controlled mechanical tooth-embedded differential lock, which supports tank turning and creeping modes. In addition to four-wheel drive, sand, mud, snow, etc., the driving mode increases the force soul mode. (Written by Qin Chao, Automobile House).